How To Seal A Shower And Restore Your Bathroom?

Google+ Pinterest LinkedIn Tumblr

Sealing your shower shouldn’t be much of a hassle if you are familiar with DIY hacks at your home. However, many Australians consider hiring experts for shower sealing in their bathrooms. It makes sense to prioritize experience, and use high-quality sealants to restore the place.

In case you observe that the current sealant is likely to give way, make sure to fix the shower before the condition worsens. Silicone sealants are popular in Australian homes, as it holds the water from getting into places where it should be. This way, proper sealants can secure your bathroom from moulds.

When should you seal your shower?

In the first place, you should be inspecting your shower regularly for its existing sealant. If it gets old, you might observe that the sealing starts to peel off. Sometimes, it becomes mouldy. Ignoring the sealant will ultimately let the water seep in, inflicting damage to the walls. Experts recommend sealing a bathroom with high-quality materials to keep them in good shape over the years.

At times, you might not even detect the peeling sealant at a normal glance. A spray test will help you determine the condition of the sealant. You can splash the sealant with some water. In case you find the water trickling down, it means the seal is holding good. However, if the liquid appears to get into the seam, use a paper towel to blot the area. Now, if you notice any type of dampness in the towel, it implies a poor sealing. Therefore, you need to get a new sealant for your shower.

Materials needed for shower sealing

It would be wise to call in a professional to seal your shower. However, if you decide to go for the DIY way, you would need the following materials.

Silicone sealant

  • Paper towels
  • Old rags
  • Silicone sealant remover
  • Needle-Nose Pliers
  • Painter’s Tape
  • Box Cutter
  • Gloves
  • Smoothing Tool
  • Paintbrush
  • Silicone Guns

How to remove the current seal?

Firstly, you need to remove the existing seal before you install the new one. Simply cut the central part of the sealant, taking care not to damage the shower. Use your fingers to put away the old sealant. The joint scraper or needle-nose pliers would also serve the purpose. Now apply a sealant remover to soften the residue and then scrape it away. When dry, you need to use a paintbrush to scrub the area. Make sure to soak this brush in a non-ammoniated bath cleaner. Once done, use a paper towel or clean rag to rinse the area dry.

 How to apply the new sealant?

 Now that you have got the shower ready for the new sealant, here’s how you should go about it. You will get straight bead lines in the borders by applying masking tape. Now, prepare your silicone gun to apply the sealant. A pair of scissors or a knife would be perfect for cutting off the cartridge top. In order to fit the joint width, you should trim the nozzle in a diagonal way. When you apply the sealant, start from one of the corners. Maintain an even pressure and create a 45-degree angle for a smooth flow. Once done, remove the tape slowly and let it dry.

The process of sealing your shower is easy, and wouldn’t take long. Make sure to get a branded sealant, and if necessary, call in an expert.